I signed up for Mediacom the 12th of March 2019, new coax line to my house (temp line above ground) and the only coax going into my house is a new run strait to my modem. Probably less than 30ft from the outside box. I have an Arris SB8200 with a Unifi USG router behind it. Since being connected, my WAN up-time is usually never more than 2-3 hours. I had a tech come out this week to double check the lines and after adding 2 splitters he mentioned the modem signal levels didn't match what his meter was showing and that I should replace my modem. As it was only a week old at that point I had a replacement sent to me. Now that replacement modem is in place and from what I can tell, the exact same signals are showing up. It seems performance is all over the place, sometimes showing excellent performance and other times being completely unusable. I need to get this figured out, I got my whole family mad at me for choosing Mediacom at this point.
Line test shows great: http://www.dslreports.com/pingtest/585544735929/3509577?r=985
Setup a smokeping to get more data from the outside perspective: http://www.dslreports.com/smokeping?target=29ce391935db4ab0d03c247e79a1349d&r=88
My speed tests range from 250Mb to 917Mb down (typically around 850Mbps) and 9 to 55Mb up (typically around 35Mbps)
Any help would be greatly appreciated :)
↧